home *** CD-ROM | disk | FTP | other *** search
- Path: shts.seed.net.tw!dmccbk!leslie
- From: leslie@dmccorp.com (Jerry Leslie)
- Newsgroups: comp.dcom.modems
- Subject: Re: Strange USR Reason Codes for Disconnects
- Date: 6 Jan 1996 16:41:57 GMT
- Organization: Dynamic Matrix Control 713/313-5000
- Message-ID: <4cm8ol$la@shts.seed.net.tw>
- References: <4c77c7$qd5@shts.seed.net.tw> <4cjgk3$3v4@lurch.sccsi.com> <4clt8f$51o@linet02.li.net>
- NNTP-Posting-Host: 198.64.232.100
- X-Newsreader: TIN [version 1.2 PL2]
-
- Barry (bebecker@newshost.li.net) wrote:
- [ snip ]
- : Blers (I think) stands for "Block Errors" but what's a block?
-
- : I had a problem with hundreds of block errors a few weeks ago. I finally
- : realized that mine started when I *added* something to the line (not when
- : I removed something). I had connected the modem of another computer to
- : the same line. Everything was fine as long as the other computer was
- : powered up, but when powered down, it loaded the line. I yanked the RJ11
- : on the other modem and the problem disappeared.
-
- : If you truly have *nothing* else on that line, is it possible that some
- : sort of line equalization was done while the phone was connected, and
- : disconnecting it screws up the equalization?
-
- : Can you re-connect the phone and see what happens?
-
- : Good luck.
-
-
- Thanks. I'll put another phone on it, and see if it helps.
-
- Is there a maximum value for BLer/Minute for the line to be acceptable ?
-
-
- --Jerry,
-
- Gerald (Jerry) R. Leslie jleslie@dmccorp.com gleslie@isvsrv.enet.dec.com
- Dynamic Matrix Control Corporation (my opinions are my own)
-